Product Description
Bushnell Laser Boresighter puts you "on" without pulling the trigger! It's fast, easy and cost-saving, designed for the demands of gunsmiths and serious shooters! NO ammo wasted getting your rifle scope sighted. You get the bright red laser emitter and arbors for common calibers from .22 up to .50 cal., plus 12 ga. and 20 ga. shotgun arbors, so it's practically universal. Runs on three LR-44 batteries (included). It's 6" long, 8 ozs. Save time and money with this easy Bushnell Boresighter. Order Now! WARNING: You must be 18 or older to purchase Lasers. Lasers cannot be shipped to New York City; D.C.; MA; Canada or Puerto Rico. Lasers cannot be shipped Parcel Post. Please check your State, County and City laws for restrictions before ordering Lasers. Bushnell Laser Boresighter
Product Details
| Publisher | Bushnell |
| Features |
|
| EAN | 0029757740106 |
| MPN | 740100C |
| Brand | Bushnell |
| Format | Sports |
| Legal Disclaimer | We do not in any way represent that any part we sell is legal to possess in your jurisdiction. Check with you local authorities to ensure it is legal for you to possess before buying! |
| UPC | 029757740106 |
| Label | Bushnell |
| Studio | Bushnell |
| Title | Bushnell Laser Boresighter |
| Model | 740100C |
| Release Date | 2009-02-19 |
| Manufacturer | Bushnell |
Customer Reviews
great bore sight !!Review by Sarge43, 2010-09-05
Easy to use. Strong laser. Fits almost everything. I used it for my LAR15 iron sights and the scope.
Sure narrows it down so don't waste ammo sighting in.
laser boresighter
Review by S. Fay, 2010-09-03
Just opened the package and could not wait to try out the laser bore sighter.I also purchased the recticle leveler.While the screws for the adapters are small,once installed they stay in place.My switch seems to operate fine at this time.As others have stated it could be said it is slightly rinkey dink.But it does operate ok for me and I have large hands and fingers.Just take your time with it.I put the device in the bore,turned it on and lined up the dot with the cross hairs.Most scopes sit about one and onehalf inch. higher then the center of your bore so compensate for that and you should be hittin dead nut.I would reccommend this bore sighter to all who want to do it yourself.Good price for what you get.Get plinkin.
Good for the price
Review by George D. Saunders, 2010-09-03
Great for the price, read the other reviews on how to best use this product
Does what it is supposed to
Review by Luc Belec, 2010-09-02
I did read the review and was very skeptical on the product and the way it's design, but it's a Bushnell, how bad it can be???. I thought, I would have to Zero-it in first, then use-it as a preliminary ruff reference then finish the job with a target at 10, 25 / 250 yards. I was concern about the flash suppressor and the normal variation of location or repetitively of this gadget.
I did give a try on my old FAL 308 who was rite 1" above the bull eye at 25 yard on it at 250y (group of 6" / 10 shots, hey I'm not that good). Well I assemble the thing with the crappie small plastic bore clamp with the Dum looking tinny screw, I plug the hole, tight-it, light-it up. I took the gun and what about that... in the house, 10yard away and it was in line vertically and near 1 1/8" above heuuu, I find a 25y target and it was there, 1"... Hummm no adjustment??? na, it can't be that good. I remove-it spin the screw and the plastic cam-lock, put-it back and again it's there, no more then 1/16 off what is the dote size. Well I was please and surprise.
I did throw-it in my AR10, lign up the iron sight, then my red/green dot with the back iron sight and the front one to. Well I put it at 1 1/4" above on the 10Y wall. I pack-up my stuff and went to the range. WOW at 25y my group was 1/2" high, and less than that on the right. Ok I will have to go to the 250y to final tune this Upper but this is Iron sight and red dot, 25y is the max I plane using this upper. For the long shot I use a scope and this thing is not design for it. It will probably keep you on a 24" target a 150y then you need a spotter to finish the job on a 250y target. But this thing really impress me, It will save me ammo and to prevent me look like an idiot missing the target at 50y.
The taper and the core of this tool can accommodate a 308 with flash suppressor without problem, on lease I'm lucky there, no pre-calibration to do, just put the rite taper cam, the screw and ligh-it up. The core has a diameter of .740" (18.9mm)(less then 3/4"), it's made of aluminum and anodize, I think. The on'off switch is a bit small and look cheesy but it work. The batteries are pre install. To me it's clearly a made-in China, then don't eat-it or give it to your children for lunch and totally avoid to give it to your Dog as a chewing toys LOL.
This is a good product for me. Use it in its defend capacity, it is more accurate then I expect, but the real way to finish the job is to go out-there, send-it out and correct it in the field, in real life and conditions. I do strongly recommend-it. And remember, you have to be smarter than your tools and understand the capacity and limitation.
Hey sorry if you have a hard time understanding what I'm saying, I'm not a composer, I'm just trying to help you with your concerns.
Valuable addition to my tool kit
Review by D. Tofflemire, 2010-08-24
I have used this to boresight over twenty rifles, and handguns. I carry it with me to the range,
it is amazing how many DYI scope installations result in missing the paper completly. This device saves a lot of time, and ammo. I charge 20 bucks to get them close enough to ffinish sigting in with only a few shots.
AccuShot Premium 1-Inch Weaver Style See-Thru Medium Profile Rings
Used starting at $8.99
New starting at $8.95
